|
This is for a brand new
GSM 900MHz 60dB Signal Repeater
Booster Amplifier Kit for Cell
Phones (not 850MHz)
for
enabling GSM Mobile Phone Network
Access from areas with poor indoor
network coverage
Only
$116.00 including Delivery
World-wide while stocks last.
see;
GSM
Please read the entire
listing before bidding
Background
Have you
experienced with poor cellular
network coverage? Do you want to
increase the GSM signal strength at
your premises?
The 60 dB cell phone repeater system
is a complete low-cost solution for
boosting GSM signals for areas
inside your home, office or any
indoor location where you need a
stronger cellular signal.
This wireless amplifier works in any
inside location where improved
cellular signal is needed: homes,
offices, buildings. It greatly
reduces disconnects and drop-outs
and can be used with multiple cell
phones and data cards
simultaneously.
It is a complete package with
everything you need is in the box.
It features wireless operation with
no connection to cell phone or data
card and Power control logic that
ensures maximum output power is
within cellular standards.
How Does the Cellular
Repeater Work?
The repeater
works with two antennas (included).
The indoor antenna communicates with
your cell phone or laptop data card,
and the outdoor antenna communicates
with the cell tower.
The included directional outdoor
cellular antenna is designed for
installation outside on a wall or a
pole, or inside on a window or wall,
depending on your preferred
configuration. The antenna receives
the outside signal and sends it
through the coax cable to the
amplifier unit, where it is
amplified and retransmitted much
more strongly through the indoor
antenna into the room.
When the indoor antenna picks up a
signal from your cell phone or data
card, the amplifier boosts that
signal and transmits it through the
cable to outdoor antenna and back to
the cell site. (Note: the Amplifier
kit will only operate if there is
adequate signal to amplify). The
better the outside signal, the more
coverage from the inside antenna.
How Large An
Improved Cellular Signal Coverage
Area?
The 60dB amplifier
kit was scaled for areas such as an
office up to 350 square meter
(200 square feet). With a very good
outside signal, improved cellular
coverage may be found in several
rooms closest to the desktop
antenna. For larger areas, contact
us for other larger Amplifiers.
Important Note: If, outside the
building, your signal is very weak
(less than 2-3 bars) or non
existent, the amplifier will most
likely not be effective. Use a
directional high gain antenna
instead.
The Amplifier
Kit Benefits
* Amplifies signals
to and from cell site
* Greatly reduces disconnects and
drop-outs
* Works on all GSM 900 MHz networks
* Supports multiple phones/data
cards
* Significantly improves voice and
data signal quality
* Increases data communication rates
* Attractive, sleek design
* Automatic power gain control
* Extends cell phone battery life
* Easy to install and use, and it's
affordable
* Up to 10 times more powerful than
your cell phone
Wireless cellular repeater system
installation setup guide
Your Amplifier
Kit works by picking up a stronger
signal from an antenna mounted on a
pole or wall outside your building
or high on a window inside your
building, facing the cell site. The
amplifier then increases the signal
and transmits it through the onboard
antenna on the amplifier to your
cell phone or laptop data card.
Before you install the amplifier
kit, it is very important that you
determine the location of the best
available cellular signal. This will
affect where you place the cradle
antenna and will help you get the
best performance from your system.
You will find the strongest signal
outside your house or building, at
the highest place available. Your
cell phone can help you find the
strongest outside signal, using any
or all of the following methods:
1. Place calls from several
locations outside your building and
note where you get the best
reception.
2. Check the bar indicator on your
cell phone display and note where
the signal appears to be the
strongest. Note: cell phone bars are
only an approximation of signal
strength and vary from phone to
phone. They can take up to 30
seconds to reset to a new reading.
Be patient and repeat your signal
check several times.
3. Some cell
phones have test modes for reading
accurate signal strength. Using the
test mode on your cell phone, move
around the outside of your building
and determine the location of the
strongest signal. Once you have
determined where the outside signal
is strongest, you should plan to
install the cradle antenna in that
general area, either outside or
inside.
Note:
Shipping is to Paypal address only.
Duties and taxes are not included in
the item price and are buyer
responsibilities. |
